Kawai MP10 User Manual download pdf (Page 27)

section

Basic Operation

EQ Section

The EQ section consists of a 3-band graphic equaliser that can be used to shape the overall tone of the MP10’s

internal sound sections. In addition, the mid-range frequency can also be adjusted as a parametric equaliser. The

equaliser setting is common to all sounds sections.



TurningEQON/OFF

Press the EQ ON/OFF button to turn the equaliser ON/OFF.

The LED indicator for the EQ ON/OFF button will turn ON or OFF

to indicate the current status of the eqauliser.



Adjusting EQ parameters

Turn the LO, MID, and HI knobs to adjust each equaliser band.

Turn the FREQ knob to adjust the frequency of the mid-range EQ.

The equaliser screen will be shown in the LCD display, with knob

adjustments inuencing the LO, MID, and HI levels, and mid-

range frequency.

* The LO, MID, and HI levels can be adjusted within the range of –9 - +9 dB.

* The mid-range FREQ can be adjusted within the range of 355 - 2500 Hz.

The display will return to the Play Mode screen after a few

seconds of inactivity.

To check the equaliser screen without adjusting the EQ knobs,

press and hold the EQ ON/OFF button.

* The EQ section levels can be oset using the EQ Oset setting in the Oset

page of the SYSTEM menu (page 74), or by pressing and holding the EQ

button then turning the LO/MID/HI knobs.

Equaliser OFF Equaliser ON

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 91 92

No comments

Kawai MP10 User Manual Page 27