Kawai MP10 User Manual download pdf (Page 73)

SYSTEM Menu

Utility

1. System Tuning

This parameter sets the global master tuning of the MP10 in

0.5Hz increments.

* The default setting is A = 440.0 Hz

2. System Channel

This parameter sets the System MIDI channel on which MIDI

messages are received when Receive Mode is set to Panel

(page 46)

* The default setting is 1ch.

3. LINE IN Level

This parameter adjusts the gain of the MP10’s LINE IN jack.

If the output level of the external device is too high, reduce the

value of this parameter. Alternatively, if the output is too low,

increase the value of this parameter.

4. Volume Fader Action

This parameter determines how the section volume faders

aect the volume parameter.

Value Description

Normal Volume changes immediately when fader is moved.

Catch Volume does not change until fader ‘catches’ the

previously stored volume value, thus preventing

unexpected volume jumps.

* The default setting is Normal.

5. LED Brightness

This parameter adjusts the brightness of the panel LEDs.

Value Description

Low Low brightness, designed for dark stages.

High High brightness, suitable for brighter ambience.

* The default setting is High

6. Out Mode

This parameter allows the MP10’s Line-out signal to be changed

from stereo to dual-mono.

This may be useful in certain situations, allowing one output to

be used for a monitor speaker and the other to be plugged into

the mixing console.

Value Description

Stereo The Line-out signal is normal stereo.

2xMono The Line-out signal is mono on both jack.

* The default setting is Stereo.

* To avoid unexpected sound issues, stereo eects such as AutoPan will be

turned OFF when 2xMono is selected.

7. LC D R eve r se

This parameter inverts the black and white pixels of the LCD

display, which may improve visibility in certain situations.

* The default setting is OFF.

8. LCD Contrast

This parameter adjusts the contrast of the LCD display.

The contrast becomes sharper as the value increases.

9. Foot Switch Mode

This parameter determines the function of the foot switch.

Value Description

Normal Foot switch functions as dened in the EDIT Menu.

Setup+ Foot switch selects the next SETUP memory.

Playback

Foot switch starts/stops selected song playback.

* The default setting is Normal.

10. E. SW Mode

This function determines whether the ON/OFF state of the EFX,

REVERB, and AMP buttons is recalled when selecting sounds.

Value Description

Preset ON/OFF state is recalled when selecting sounds.

Temp. ON/OFF state is not recalled when selecting sounds.

* The default setting is Preset.

LOW/HIGH

SYSTEM Menu parameters

VALUE: 427.0 - 453.0 Hz VALUE:1CH - 16CH

VALUE

: 0 - 127 NORMAL/CATCH

STEREO

/2XMONO

/OFF VALUE: 1 - 10

NORMAL/SETUP+/PLAYBACK PRESET/TEMP.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 91 92

Comments to this Manuals

No comments

Kawai MP10 User Manual Page 73

Comments to this Manuals

Related products and manuals for Musical Instruments Kawai MP10