Kawai CA17 User Manual download pdf (Page 48)

Appendix

Assembly Instructions

3. Mounting the main body onto the stand

Ensure that two or more people undertake the

following step of the assembly process.

Lift the main body and carefully place it onto the stand.

Position the main body towards the front of the stand, so

that the metal tting holes are visible when viewed from

above.

Gently slide the main body backwards until the base

engages with the stand xings and locks into place. When

positioned correctly, the attachment screw holes should

be visible from the underside of the main unit.

* If the screw holes are not visible, re-adjust (loosen) the screws

attached in step 2-4.

When lifting the main body onto the stand, be

careful not to catch/trap hands and ngers.

4. Fastening the main body to the stand

View the front of the instrument to ensure that the main

body and side panels are in alignment.

* If the parts are not in alignment, re-adjust (loosen) the screws

attached in step 2-4.

Loosely fasten the front of the main body to the stand from

below, using two screws (with washer)

on either side.

Loosely fasten the rear of the main body to the stand from

below, using the remaining two screws (with washer)

either side.

When all four screws are attached and the main body is

correctly positioned on top of the stand, securely tighten

all screws.

Tighten all screws securely to ensure that the

main body is rmly attached to the stand.

Front view

1 2 ... 43 44 45 46 47 48 49 50 51 52

No comments

Kawai CA17 User Manual Page 48