Kawai CA17 User Manual download pdf (Page 47)

Appendix

Assembly Instructions

1. Attaching the side panels to the pedal board

Unfasten and extend the pedal connection cable attached

to the bottom of the pedal board (D).

Attach the pedal board (D) to the left (B) and right (C) side

panels using the temporary mounting screws located on

either end of the pedal board.

Ensure that the pedal board and side panels make close

contact, and that there are no large gaps between the

assembled parts.

Insert the four short silver tapping screws into the holes

as shown, and securely fasten the pedal board to the left

and right side panels.

gap

temporary

mounting

screw

2. Attaching the back board

Allow the assembled pedal board and side panels to stand

upright (vertically) on the oor.

* Ensure that the support bolt is attached to the pedal board.

Loosely attach the back board (E) to the left and right side

panels using the four long black tapping screws

Loosely attach the back board to the pedal board using the

four mid-length black tapping screws

Adjust the positioning of the pedal board, side panels, and

backboard to ensure that all parts are in alignment, then

tighten the screws in steps

and .

pedal support bolt

not aligned

1 2 ... 42 43 44 45 46 47 48 49 50 51 52

No comments

Kawai CA17 User Manual Page 47