Kawai MP11 User Manual download pdf (Page 99)

SYSTEM Menu

Utility

1. System Tuning

This parameter sets the global master tuning of the MP11 in

0.5Hz increments.

* The default setting is A = 440.0 Hz

2. E. SW Mode

This function determines whether the ON/OFF state of the EFX,

REVERB, and AMP buttons is recalled when selecting sounds.

Mode Description

Preset ON/OFF state is recalled when selecting sounds.

Temp. ON/OFF state is not recalled when selecting sounds.

Fixed

ON/OFF state and E. Setting are not recalled when

selecting sounds.

* The default setting is Preset.

3. Knob Action

This parameter determines the adjustment behaviour of the

four control knobs (A, B, C, D).

Mode Description

Normal Value changes immediately when control knob is turned.

Catch

Value does not change until control knob ‘catches’ the

previously stored value, thus preventing unexpected

jumps in parameter values.

* The default setting is Normal.

4. Volume Fader Action

This parameter determines the adjustment behaviour of the

section volume faders.

Mode Description

Normal Volume changes immediately when fader is moved.

Catch

Volume does not change until fader ‘catches’ the

previously stored volume value, thus preventing

unexpected volume jumps.

* The default setting is Normal.

5. LCD Contrast

This parameter adjusts the contrast of the LCD display.

The contrast becomes sharper as the value increases.

* The default setting is 5.

6. LCD Reverse

This parameter inverts the black and white pixels of the LCD

display, which may improve visibility in certain situations.

* The default setting is OFF.

7. Input Level

This parameter adjusts the gain of the MP11’s LINE IN jacks.

If the output level of the external device is too high, reduce the value

of this parameter. Alternatively, if the output is too low, increase

the value of this parameter.

* The default setting is 0 dB.

8. Audio Out Mode

This parameter allows the MP11’s LINE OUT signal to be

changed from stereo to dual-mono.

This may be useful in certain situations, allowing one output to be

used for a monitor speaker and the other to be plugged into the

mixing console.

Mode Description

Stereo The Line-out signal is normal stereo.

2xMono The Line-out signal is mono on both jacks.

* The default setting is Stereo.

* Stereo EFX such as AutoPan will be turned OFF when 2xMono is selected.

10. Auto Power O

This parameter determines the period of inactivity that should

pass before the MP11 automatically turns OFF.

Value Description

O The Auto Power O function is disabled.

30 mins. The MP11 will turn o after 30 minutes of inactivity.

60 mins.

The MP11 will turn o after 60 minutes of inactivity.

120 mins.

The MP11 will turn o after 120 minutes of inactivity.

* The default setting for this parameter depends on the market region.

value: 1 ~ 10

SYSTEM Menu parameters & functions

value: 427.0 ~ 453.0 Hz preset, temp., fixed

normal, catcH normal, catcH

on, off

value: –18 dB ~ +18 dB stereo, 2xmono

9. Lock SW Mode

This function determines which controls will be locked when

the LOCK ( ) button is pressed.

Mode Description

Panel The main control panel will be locked.

Bend The pitch bend wheel will be locked.

Mod.

The modulation wheel will be locked.

Center

The centre pedal will be locked.

Left

The left pedal will be locked.

EXP

The expression pedal (EXP) will be locked.

* The default setting is Panel Lock.

off, 30 mins., 60 mins., 120 mins.

6 types

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 139 140

Comments to this Manuals

No comments

Kawai MP11 User Manual Page 99

Comments to this Manuals

Related products and manuals for Musical Instruments Kawai MP11