Kawai CN33 User Manual download pdf (Page 67)

Page

APPENDICES

6. Place the stand upright so that the backside of the stand

assembly rests against a wall, then slowly and carefully insert

the piano. Ensure that more than two people work on the

assembly. If attempting to insert the piano without resting the

stand against a wall, support the back of the stand using your

foot or leg to prevent the stand from sliding backwards.

7. Fasten the piano (A) to the stand with four screws (I).

8. Fix the headphone hook and screws (K) if desired.

Tightly fasten the screws (H) (with the * symbol in step 5).

. Insert the connector of the pedal cord into the receptacle, and

ﬁx the cord with the cord clamp (J).

. Turn the adjustor bolt (E) at the bottom of the pedal stand until

the bolt ﬁrmly touches the ﬂoor, supporting the pedal board.

. Connect the power cable (K) to the AC IN terminal on the base

of the main body, then pass the cable through the back board

aperture, and out to the rear of the instrument.

. Remove the protective ﬁlm from the display.

Caution

y Ensure that the piano is not dropped on an

individual’s feet, and that ﬁngers, hands and

feet are not caught in the piano.

Caution

y Ensure that the piano and the stand are

securely fastened together with the correct

screws to prevent the possibility of the

piano falling.

Caution

y Ensure that the adjuster bolt (E) firmly

touches the ﬂoor, supporting the pedal board

and preventing damage.

When moving the piano, shorten the adjustor

bold (E) and readjust after moving has been

completed.

(E)

(L)

9 y 10

(J)

(H)*

Protrusion

6 y 7 y 8

(A)

(K)

(I)

1 2 ... 62 63 64 65 66 67 68 69 70 71 72

Comments to this Manuals

No comments

Kawai CN33 User Manual Page 67

Comments to this Manuals

Related products and manuals for The input devices Kawai CN33